For Opel diagnosis & programming, Opcom HQ clone, GM MDI interface, Tech 2 clone, which is the best solution?

A bad ECM may lead to a vehicle that won’t or is difficult to start. Leave the fuse out for 15 minutes. EPS - Electrical Power SteeringNutz - 1976 - Hard Nutz. 1999 and newer Volvo S80 with ABS/STC system. Do you think it could be the road speed sensor gone bad. 61 with 26000 drivers Original wiTech Micropod II vs. (, 02:17 PM) Sam102 Wrote: Does anyone know if the Micropod II using wiTECH can even connect to a 2001 anything? Dietrih can help Worth the money Activated Witech 17.04.27 for my clone Works perfect including online. WITECH MicroPod 2 Diagnostic Tool: 1. The copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly. With high-quality USB cable which transfer data stably and reliably 3. The package is anti-static, moisture-proof, anti-electromagnetic interference 4. Works with your current wiTECH.

Original Chrysler wiTech MicroPod II VS HQ clone April 21, 2017 sales Car Diagnostic Tool 0 Here’s a comparison chart of genuine vs. Clone witech micropod 2 system, incl. High-quality witech micropod system vs. Bad micropod 2 china clone.

Purpose:

need a tool+software for newest opel cars as Astra k, Corsa E Adam etc

Suggestion:

– Opcom HQ clone for usually using with last opcom 150406b is good but not good coverage in this moment for all this new models. And the china clone with old opcom 12309a is only good for pre 2014 cars diagnosis.

A opcom hq clone is less then 100€ and its only Revision B

You need at least Revision C or a D that cover CH-CAN
A Revision C HQ clone could be 100€ but a HQ clone Revision B is less

– In my opinion as a backup you must have of this but to have 100% coverage in all this car you need a GM MDI.

GM MDI genuine one is 800€; second hand and a clone is less

Even GM MDI clone can program ecu online for new cars.

– Tech2win and GDS2 with the 2013 package.
Official subscription is 120€/year ( unofficial is less and for more than a year ).
Tech2 win subcription you can find for free
For online SPSP Programming you can buy official subscription for one hour or a day. Its chap enough (no offline solution after 2007)

In summary,

Opcom china: diagnosis for pre 2014 models
GM MDI clone: online programming for new cars

Tech 2 clone: Tech2win and GDS2 2013, programming for pre 2007 cars

Review:

opcom can do most things for Opel/Vauxhall and is the cheapest option there’s tech 2 but very expensive all depends on your budget etc

I have personally programmed new keys to corsa c astra h etc all with opcom and never had a problem.

Carprog is another good 1 for reading ecu security pins.
Good luck!

Product Description

WiTech MicroPod 2 Diagnostic and Programming System for Chrysler
1. Software Version: V17.04.27
2. Multi-Languages Available: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese
3. PC-Based: Requires PC connection(4GB memory at least)
Using Tips (Important): Do not connect to network when you use the device.
WiTech MicroPOD II Features:

1.Supports all the latest technologies and vehicle platforms including the latest Chrysler and Fiat Vehicles.
2.Works as a direct replacement for the wiTECH POD
3. It can be used as diagnostic and programming tool by the dealerships. It replaces your StarMobile, StarScan, and wi-TECH POD, and enables your technicians to increase their productivity and provide world-class diagnostic services to your customers.
4. A separate Tech Authority Subscription is required to access to Module Re-Flash Programming, TSBs, wiring diagrams, and repair information.
5.MicroPOD II Model Year Coverage: Although small in stature, this dongle-style device offers 100% CAN - equipped coverage to 2016 for Chrysler, Dodge, Jeep, and Fiat vehicle platforms.
WiTECH MicroPod 2 Diagnostic Tool Highlights:

Installation Precautions：
1. installation AdobeAIRInstaller.exe
2. installation jre-6u45-windows-i586.exe
3. installation wiTECH_Install_17.04.27.exe
4. Restart the computer
How to solve WITECH registration issues
WITECH_Install_17.04.27 software as fololw:

https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg
WARNING：
1. The computer displays the right time of the day
2. The computer must be connected to the Internet
3. Connect the machine to the device to open the software
4. Tip registration, Turn off the software and turn it on Repeat several times You can use it normally
MicroPOD II Software Display:

WiTech Micropod2 red light flashes microprocessor 1 is unresponsive solution:

Hq Clone Witech Micropod Ii Vs. Original Auto Diagnostic Tool Kit

Problem:

Hq Clone Witech Micropod Ii Vs. Original Auto Diagnostic Tools

I was ready to connect the wiTECH2 Micropod 2 interface to diagnose Chrysler 300M, but after i connected the adapter with laptop, the MicroPod2 indicator light flashed and software prompted error message “microprocessor 1 is unresponsive”. What’s the problem

Possible cause:
1.Software is not compatible with hardware/firmware.

We have several wiTECH2 Micropod 2 Chrysler diagnostic scan tools clone (SP271-C,SP271-B,SP271), they are made by different manufacturer. Software cannot be mixed used. i.e SP271-C wiTech software can work with SP271-C Micropod II firmware. Please use the default software CD in package.

2. Incorrect connection

Please follow the correct steps to connect the micropod2

1. Connect wiTech Micropod2 to vehicle first

2. If the red indicator light turn on, then connect wiTech to laptop

3. Open wiTech software (if software detect newer wiTech version,it will run an upgrade.Wait the upgrade completed. If it does not prompt to update software to newer version, just run software)

If you connect to laptop first (power by USB cable) and run software immediately, software and firmware will automatically synchronous upgrade and that will lead to the firmware failure. MUST CONNCT THE DEVICE TO VEHICLE.

Hq Clone Witech Micropod Ii Vs. Original Auto Diagnostic Tool Set

If the red indicator flashes, the firmware is damaged. You have to send it back to repair.

How to solve wiTech MicroPod 2 V17.04.27 register error

Issue:
'Registration is needed
Device with serial number*** is not registered. Please check the knowledge
base to determine how to register a device'
Working Solution:
1. Right click Witech Diagnostic Application-> Properties->Open file location
2. Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open app-config text file
3. Find out 'VerificationHash', then the followed 'Value', change the first number to any value i.e change 6 to any number between 1-9.
Then save the text file. (Very important!!!)
Run Witech Micropod II software.
If it still display message' an internal registration error has occurred ', just close this windows to ignore it.
Tick off ' Offline work' at the left corner of screen, then you don't need to login.
Click on 'Finish'.
Problem Fixed.
Go on using wiTech MicroPod 2 to diagnose or program Chrysler.

Witech V17.04.27 FAQ:

Hq Clone Witech Micropod Ii Vs. Original Auto Diagnostic Toolkit

Q: Will witech diagnose Chrysler till 2018?
A: Yes.
Q: Can I install witech v17 on Windows XP laptop?
A: No. Recommend install witech on Windows 7.
Q: Witech gave me error registration required. How to solve device with serial number not registered error?
A: Follow video guide here to solve the problem:
How to solve Witech Micropod 2 internal registration error: https://youtu.be/dcezTuJxxT4
Q: Possible to connect WiFi with micropod ii?
A: Sorry, Miropod II does not support WiFi connection.
Q: Does witech dianose Fiat Alfa as well?
A: You can try to diagnose Fiat and Alfa if you have online account. If don't, it does not.
Q: Will witech do dodge challenger 2016 diagnosis?
A: Yes, it will.
Q: Does witech support Jeep Rengade?
A: Yes.

Hq Clone Witech Micropod Ii Vs. Originalauto Diagnostic Tool

Package List:

1pc x MicroPOD II interface
1pc x USB cable
1pc x CD

Accessories for 2M2 Magic Tank
If you have any questions, please feel free to contact us
WhatsApp: + 86 18205950686
Email: sales@KeyProM8.com
Skype: KeyProM8.com